DoorKing 1816 Owner's Manual download pdf (Page 43)

3.5.8 Delete Area Codes

This program sequence deletes area code numbers that have been programmed into the system.

1. Press *24 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the area code reference number (0 through 9) _ then press * (beep).

3. Enter # # # # then press * (beep).

4. Repeat steps 2 and 3 to delete additional area codes.

5. Press 0# TOGETHER to end this programming step (beeeeeep).

3.5.9 Display Phone Numbers (1834, 1835, 1837 Systems Only)

Use this programming sequence to display phone numbers programmed under known directory

codes, i.e. if you wanted to see what phone number was programmed under directory code 271. This

programming sequence will not allow you to delete phone numbers.

1. Press *06 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the directory code (1, 2, 3 or 4 digits depending on what was programmed in

3.5.1) then press * (beep).

3. The phone number programmed under the directory code entered in step 3 will be

displayed on the LCD. If C C C C C C C is displayed, this indicates that no phone

number has been programmed under the entered directory code. If the first digit is

flashing, this is the area code reference code and indicates that the number

displayed is a long distance or 10-digit number.

4. To display additional phone numbers press * and repeat step 2.

5. Press 0# TOGETHER to end this programming step (beeeeeep).

3.5.10 PBX Line Access Code Programming

If the telephone entry system is connected to a PBX telephone system rather than a dedicated C.O.

line, you may need to set the unit to dial a line access code prior to dialing the resident phone

number. Typically, the line access code is “9”, but check with the PBX system administrator to be

sure.

1. Press *09 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the line access code number _ then press * (beep).

3. Press 0# TOGETHER to end this programming step (beeeeeep).

NOTE: To change a line access number, enter the correct number in step 2. To

delete a line access number, enter # in step 2.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 64 65

No comments

DoorKing 1816 Owner's Manual Page 43