DoorKing 1816 Owner's Manual Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 49
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
3.5 Do Not Disturb Features / Commands
The Do Not Disturb feature provides time zones that prevents calls from the lobby panel to ring up to
a resident.
3.5.1 Do Not Disturb Feature On / Off – System Wide
This determines if the system will allow the do not disturb features to be active, or prohibits the do not
disturb features from functioning. This is a system wide programming step; either do not disturb
features are allowed for all residents or do not disturb features are prohibited for all residents.
Turning the do not disturb feature off will not erase any programmed do not disturb time zones.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *51 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter 0 to turn do not disturb Off, or enter 1 to turn do not disturb On, then press * (beep).
4. Hang up the doorman telephone to end the programming session.
3.5.2 Set 1-Time Do Not Disturb Timer for Resident(s)
This is a one-time timer that will provide do not disturb for a specific resident for a specific amount of
time (1 to 99 hours). Once the timer expires, calls will be allowed to the resident. This is not a
schedule; the timer is simply turned on or off for a set period of time and will not repeat itself.
Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *21 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter the four-digit relay number of the resident the timer is being set for _ _ _ _ then
press * (beep). Note: entering 9 9 9 9 in this step will set the timer for all residents.
4. Enter 0 to turn the timer Off, or enter 1 to turn the timer On, then press * (beep). Note: if
0 is selected in this step, go to step 6 to end the programming session.
5. Enter the timer hours (01-99) _ _ then press * (beep).
6. Repeat steps 3-5 to program another resident.
7. Hang up the doorman telephone to end the programming session.
Page 34 1816-065-K-12-11
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 48 49

Comments to this Manuals

No comments