DoorKing 1816 Owner's Manual download pdf (Page 62)

6.2 Accessories

Surface Trim Ring Use to recess a surface mount unit into a wall or column. P/N 1803-150.

Flush Kit Use to install flush style units into a wall or column. Kit includes rough in

back box and trim ring. P/N 1814-165 comes with stainless steel trim

ring. P/N 1814-166 comes with gold plated trim ring.

Flush Ring Use to surface mount a flush style unit. P/N 1814-152.

Stainless Steel Case Replaces the black steel surface mount case with a stainless steel case.

P/N 1810-102.

Surge Suppressers High voltage (115 V) suppresser. P/N 1878-076. Phone line

suppresser. P/N 1878-077. Low voltage (28 V) suppresser. P/N 1878-

078.

Mounting Post Heavy-duty goose-neck mounting post with mounting plate. P/N 1200-

038. Heavy-duty goose-neck mounting post with concrete base plate for

pad mounting. P/N 1200-037.

Telephone Test Set Includes clips, cord and carrying case. P/N 1800-050.

Battery 12 volt .8 amp hour gel cell provides stand by power during power

interruptions. P/N 1801-008.

Tracker Boards Tracker expansion boards (P/N 2351-010) allow the 1833, 1835 and

1837 system to operate up to sixteen individual doors or gates, provides

door ajar and forced entry alarms, and can activate local and building

alarm systems. Also allows DoorKing gate operators to report gate

operator data and activity to the entry system.

RS-232 Cable RS-232 cable with DB-9 connector on one end and wires on the other

end. Use this cable to program the entry system from a PC using RS-

232 communications instead of the modem. P/N 1818-040.

Elevator Board Elevator control boards (P/N 2348-010) provide control of up to four

elevators, with each elevator having a maximum of 64 floors.

1 2 ... 57 58 59 60 61 62 63 64 65

No comments

DoorKing 1816 Owner's Manual Page 62