DoorKing 1814 Owner's Manual download pdf (Page 36)

3.3.5 Touch-tone / Rotary-dial

This programming sequence will set the telephone entry system to dial out in either a touch-tone or

rotary format. Generally, this will be set for touch-tone.

Factory setting = touch-tone.

1. Press *07 and enter the four digit MASTER CODE _ _ _ _ (beep).

2. Enter 0* (beep) for touch-tone or enter 1* (beep) for rotary.

3. Press 0# TOGETHER to end this programming step (beeeeeep).

3.3.6 Single or Multiple Systems

This program sequence sets the telephone entry system to operate as a single unit on the phone line,

or to share the phone line with other units. If multiple systems are sharing the same phone line, then

each one must be set as a "multiple system" and each must have a unique master code.

Factory setting = Single System.

1. Press *04 and then enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter 0* (beep) for a single system or 1* (beep) for multiple systems.

3. Press 0# TOGETHER to end this programming step (beeeeeep).

3.3.7 Clock Programming

This program sequence programs the calendar chip in the telephone entry system for the current time

and date.

1. Press *33 and then enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter the current hour and minutes (hhmm) _ _ _ _ then press * (beep). Do not use the

24 hour (military) time format, simply enter the hour (2-digits) and the minutes (2-digits).

For example, 8:30 will be entered as 0830 whether it is AM or PM.

3. Press 0 * (beep) for AM, or press 1 * (beep) for PM.

4. Enter the month (2-digits) _ _ then press * (beep).

5. Enter the day of the month (2-digits) _ _ then press * (beep).

6. Enter the year (2-digits) _ _ then press * (beep).

7. Enter the day of the week (Sunday = 1; Saturday = 7) _ then press * (beeeeeep).

Page 36 1835-065-T-7-12

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 70 71

No comments

DoorKing 1814 Owner's Manual Page 36