Doorking 6500 User Manual download pdf (Page 27)

6500-065-K-7-08

SECTION 4 - OPERATING INSTRUCTIONS

WARNING - To reduce the risk of injury or death:

1. READ AND FOLLOW ALL INSTRUCTIONS.

2. Never let children operate or play with gate controls. Keep the remote control away from children.

3. Always keep people and objects away from gate. NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE.

4. Test the operator monthly. The gate MUST reverse on contact with a rigid object or stop or reverse when an object

activates the non-contact sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to

adjust and retest the gate operator properly can increase the risk of injury or death.

5. Use the emergency release only when the gate is not moving and power has been shut-off.

6. KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a qualified service person make repairs to gate

hardware.

7. The entrance is for vehicles only. Pedestrians must use separate entrance.

8. SAVE THESE INSTRUCTIONS.

Unlock the power switch cover and open to access the MAIN POWER, DC POWER and the operator RESET switch.

POWER

OFF OFF

RESET

4.1 Power and Reset Switches

Reset Switch - Used to turn off the

entrapment alarm and to reset the

operator after a hard shutdown has

occurred.

Alarm Speaker

AC Power Switch - Powers the operator

ON (toggle up) or OFF (toggle down).

DC Power Switch - Turns the DC system power ON (toggle up)

or OFF (toggle down).

This switch is only installed on model 6500 operators with the

DC convenience open system installed.

IMPORTANT SAFETY INSTRUCTIONS

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

No comments

Doorking 6500 User Manual Page 27