DoorKing 1812 Owner's Manual download pdf (Page 32)

2.5 Time Functions

2.5.1 Program Calendar Chip

This programming sequence programs the calendar chip in the 1812 system for the current time and

date. The calendar chip must be programmed if any of the time related features are going to be used.

Note: The clock / calendar chip in the 1812 Plus will keep time for approximately 48 hours if power to

the system is lost or removed. If power is off longer than this, the clock / calendar chip will have to be

reprogrammed.

1. Press * 3 3 and enter the MASTER CODE. [ * 3 3 _ _ _ _ (beep)]

2. Enter the current hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]

Do not use military (24 hour) time format, simply enter the hour (2 digits) and the minutes

(2 digits). For example, 8:30 is entered as 0830 whether it is AM or PM.

3. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]

4. Enter the month (01-12) day of the month (01-31) and the year (00-99) then press *.

[ _ _ _ _ _ _ * (beep)]

5. Enter the day of the week (1-7) then press *. [ _ * (beep)]

Sun =1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.

6. Press 0# TOGETHER to end. [0# (beeeeeep)]

EXAMPLE: Saturday, February 14th, 2009, 11:30 AM.

1. * 3 3 _ _ _ _ (beep)

2. 1 1 3 0 * (beep)

3. 0 * (beep)

4. 0 2 1 4 0 9 * (beep)

5. 7 * (beep)

6. 0 # (beeeeeep)

2.5.2 Call Forward Time

This programming sequence turns the call forward feature either ON or OFF and sets up a schedule

for the call-forwarding feature. You must also program a call forwarding number (2.5.3).

1. Press * 3 7 and enter the MASTER CODE. [ * 3 7 _ _ _ _ (beep)]

2. Press 0 * to turn call forwarding OFF, OR press 1 * to always call forward, OR press 2 *

to call forward per the call forward schedule. [ _ * (beep)]

You can terminate here (step 8) if you have previously programmed the schedule and

only ON / OFF or Call Forward per the schedule is desired.

3. Enter the begin time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]

4. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]

5. Enter the end time hour (01-12) and minutes (01-59) then press *. [ _ _ _ _ * (beep)]

6. Press 0 * for AM, OR press 1 * for PM. [ _ * (beep)]

7. Enter the days of the week that the call forward time zone is to be active then press *.

[ _ _ _ _ _ _ _ * (beep)]

Sun = 1, Mon = 2, Tue = 3, Wed = 4, Thu = 5, Fri = 6, Sat = 7.

You can enter up to 7 numbers here (1-7). For example, for the hold open to be active

only on Saturdays and Sundays, enter 1 7. The order of the numbers is not important; 17

is the same as 71.

8. Press 0# TOGETHER to end. [0# (beeeeeep)]

Page 32 1812-161-E-1-10

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 52 53

Comments to this Manuals

No comments

DoorKing 1812 Owner's Manual Page 32

Comments to this Manuals

Related products and manuals for Door intercom systems DoorKing 1812