Doorking 1802 Entry System User Manual download pdf (Page 40)

3.5.5 Flash Entry Codes

This programming sequence sets up "FLASH" four-digit entry codes. Flash codes are entry codes

that will operate on a specific day of the month only - they will not operate before or after the

programmed day. The flash code will be valid for a single 24-hour period only. For example, if you

program a flash code on July 1st to be active on the 10th, the code will become valid at 00:00 AM on

July 10th and expire at 11:59 PM. The code will not be valid on August 10th. You can program up to

eight flash codes in the system. Flash codes 1 through 4 will activate relay 1, flash codes 5 through 8

will activate relay 2.

1. Press *15 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2. Enter a flash code number (1 - 8) then press * (beep).

3. Enter the day of the month that the code is to be active _ _ then press * (beep).

4. Enter a four-digit FLASH ENTRY CODE _ _ _ _ then press * (beep).

5. Repeat steps 2 through 4 to enter additional flash codes.

6. Press 0# TOGETHER to end this programming step (beeeeeep).

Page 40 1802-065-E-5-10

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 52 53

No comments

Doorking 1802 Entry System User Manual Page 40