Doorking 1820 User Manual download pdf (Page 44)

3.8 Call-Down Features / Commands

The call-down feature in the 1820 allows resident’s to contact the doorman / concierge directly from

their apartment phone without having to dial a 7-digit phone number. It also provides residents with

various programming options that they can control directly from their apartment. There are two

modes of operation for the “Call-Down” feature.

• Direct Connect: In this mode, a resident can call down to the Doorman and be connected

directly with the Doorman telephone. The Doorman simply answers the phone to speak with

the resident.

• Call Back Mode: In this mode, the resident will call the Doorman and the call will

automatically be placed on a queue. The resident information is shown on the caller ID

display of the Doorman telephone. The Doorman then calls back the resident when he is

available. The system will automatically enter this mode when the Doorman phone is busy or

if the system is busy (another call in progress). The Doorman may also have the option of

putting the system into this mode either temporarily with a timer, or with an On / Off

command.

3.8.1 Call-Down Feature On / Off – System Wide

This determines if the system will allow the call-down features to be active, or prohibits the call-down

features from functioning. This is a system wide programming step; either the call-down features are

allowed for all residents or the call-down features are prohibited for all residents.

Factory Default = 1 (On)

1. Take the doorman telephone off hook.

2. Press *32 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter 0 to turn call-down Off, or enter 1 to turn call-down On, then press * (beep).

4. Hang up the doorman telephone to end the programming session.

3.8.2 Set Doorman to Enable / Disable Direct Connect

This determines if the Doorman has the ability to enable and disable the Direct Connect Call-Down

function. If set to allow the Doorman to enable and disable the Direct Connect feature, this

programming step will also determine if the disable function is timer based (see 3.8.3) or is set for an

On / Off function.

Factory Default = 1 (Doorman disable is allowed), 0 (Disable timer is OFF)

1. Take the doorman telephone off hook.

2. Press *34 and enter the four-digit MASTER CODE _ _ _ _ (beep).

3. Enter 0 (Doorman CANNOT disable Direct Connect), or enter 1 (Doorman CAN disable

Direct Connect), then press * (beep).

4. Enter 0 for the Doorman disable to be toggle based (On / Off), or enter 1 for the Doorman

disable to be timer based, then press * (beep).

5. Hang up the doorman telephone to end the programming session.

Page 44 1820-065-B-2-06

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 62 63

No comments

Doorking 1820 User Manual Page 44