DoorKing 9310 Owner's Manual download pdf (Page 13)

2.3.2 MASTER / SLAVE OPERATORS

SLIDE GATE MASTER

4402 BOARD

SLIDE GATE MASTER

4402 BOARD

OPEN

MASTER / SLAVE CONDUIT

2340 BACKUP CONTROL BOARD

Figure 6

• Slide gate systems use two master operators rather than a master-slave combination to

create bi-parting slide gates. Wire slide gate master / master operators as shown in Figure 6.

Color code shown assumes the use of DoorKing master / slave cable. Order part number

2600-755 (30 ft.), 2600-756 (40 ft.), 2600-757 (50 ft.).

• Be sure to connect the auxiliary terminal (CLS PHOTO) on the 4402 board as shown). This

assures that activation of a secondary entrapment device will stop or reverse both gates.

• See slide gate operator installation manual for connection of secondary entrapment

protection devices.

• NOTE: If the battery backup system auto-open feature is not used, an additional wire

will need to be run in the master-slave conduit. With this wire, connect terminal 2 on

the battery backup circuit boards to each other.

Page 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

No comments

DoorKing 9310 Owner's Manual Page 13